Description
This is a high quality laser plywood made in Australia from natural Tasmania oak veneers and quality Australian made MDF core layer.
This product has the following attributes
Thickness: 4mm
Face Grade: These veneered sheets have an A grade face and downgraded back
Front Veneer: Mixture of crown and quarter cuts
Glue Type: Veneers are bonded using a PVA glue. MDF uses a MUF (Melamine urea formaldehyde) and UF (Urea Formaldehyde) glue.
Sheet Size: This sample pack includes 1 x Blackbutt 4mm 600x400mm, 1 x American Walnut 600x400mm and 1 x Tasmanian Oak 600x400mm sheet.
What to expect with and veneered plywood
– Cuts are consistent due to it having an MDF core layer
– These sheets are carefully setup by hand and then compressed by machinery. Sometimes the veneer layer can be slightly longer or shorter than the MDF sheet. Allow a variance of +/- 5mm on each end of the full sheet.
– Cuts should also allow +/-5mm. A 600x900mm cut option may be 605x895mm as example.
All of our veneered plywood sheets have a thickness of 4mm.
Q. Are the sheets flat?
A. As these sheets use MDF which is a very stable core layer, we have found this product to be very flat and easy to work with. It is always best to keep sheets away from heat or sunlight and stored under a thicker board to both insulate as well as keep the sheets flat.
Q. How do you package the plywood
A. Similar to our other plywood’s, stock is carefully handled, cut and packaged. We use heavy duty custom boxes to send the majority of our products including plywood. Below is 600x400mm and 600x600mm orders being packed.
Additional Information:
- As this is a natural timber product, each sheet will be unique in terms of grain pattern and the presence of darker sections from inner layers of the plywood.
- Across an entire 1200×2400 sheet there may be occasional isolated imperfections
- Keep away from moisture and humid environments.
- It is recommended to store your plywood sheet with a weight on top of the entire sheet and to store in a dry area out of direct sunlight or varying temperatures.
- Sheet measurements may have a variance of +/- 5mm as we do us a vertical panel saw to cutdown plywood
- Whenever cutting this material make sure you are using proper fume extraction ventilated outdoors with adequate airflow
